Tensile properties and work hardening behavior of continuous-extruded Al-1.1Mg-0.3Cu alloy

Hui Zhang, Song Luo, Fulin Jiang

    研究成果: Contribution to journalArticle査読

    1 被引用数 (Scopus)

    抄録

    In order to improve the drawability of Al-1.1Mg-0.3Cu alloy wire rod, the microstructures and mechanical properties of continuous extruded and conventional drawn and annealed alloys were investigated by observation of optical microscopy, transmission electron microscopy and scanning electron microscopy and tensile testing. The experimental results show that continuous extrusion forming produced a finer, more uniform structure, with fewer precipitates and lower dislocation density, than that resulting from conventional drawing followed by annealing processing. Increased tensile elongation, lowered work hardening rate, and enhanced drawability resulted from continuous extrusion processing. The fracture surface of the material prepared by continuous extrusion presented deeper and finer dimples, compared with that of the conventionally processed material.

    本文言語英語
    ページ(範囲)60-65
    ページ数6
    ジャーナルHunan Daxue Xuebao/Journal of Hunan University Natural Sciences
    42
    6
    出版ステータス出版済み - 6 25 2015

    All Science Journal Classification (ASJC) codes

    • General

    フィンガープリント 「Tensile properties and work hardening behavior of continuous-extruded Al-1.1Mg-0.3Cu alloy」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル