Tests of superconducting traction transformer for railway rolling stock

H. Kamijo, H. Hata, H. Fujimoto, A. Inoue, K. Nagashima, K. Ikeda, M. Iwakuma, K. Funaki, Y. Sanuki, A. Tomioka, H. Yamada, K. Uwamori, S. Yoshida

研究成果: Contribution to journalArticle査読

19 被引用数 (Scopus)

抄録

We have been developing a lightweight and high-efficiency superconducting traction transformer for railway rolling stock. We designed and fabricated a prototype superconducting traction transformer of a floor-mount type for Shinkansen rolling stock. In this study, we present test results such as type test, system test and vibration test. We performed the type test in accordance with JIS, E5007. In this test, we measured the basic electrical characteristics. In the system test, we tested the transformer with a dynamic simulator for rolling stock, as a converter connected at secondary winding, and verified the operating characteristics. We performed vibration tests in accordance with JIS, E4031, vibrating the transformer on a shaking table with three-dimensional movement. As a result, we could verify that the transformer satisfied the requirement almost exactly as initially planned.

本文言語英語
ページ(範囲)1927-1930
ページ数4
ジャーナルIEEE Transactions on Applied Superconductivity
17
2
DOI
出版ステータス出版済み - 6 2007

All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 電子工学および電気工学

フィンガープリント

「Tests of superconducting traction transformer for railway rolling stock」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル