The effect of the gas-liquid density ratio on the liquid film thickness in vertical upward annular flow

Shoji Mori, Kunito Okuyama

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

抜粋

Annular two phase flow is encountered in many industrial equipments, including flow near nuclear fuel rods in boiling water reactor (BWR). Especially, disturbance waves play important roles in the pressure drop, the generation of entrainments, and the dryout of the liquid film. Therefore, it is important to clarify the behavior of disturbance waves and base film. However, most of the previous studies have been performed under atmospheric pressure conditions that provide the properties of liquid and gas which are significantly different from those of a BWR. Therefore, the effect of properties in gas and liquid on liquid film characteristics should be clarified. In this paper we focus on the effect of gas-liquid density ratio on liquid film thickness characteristics. The experiments have been conducted at four density ratio conditions (ρLG=763, 451, 231, and 31). As a result, it was found that liquid film thickness characteristics including the effect of liquid/gas density ratios were well correlated with a gas Weber number and the liquid Reynolds number in the wide range of experimental conditions (ρLG : 31-763, We : 10-1 800, ReL : 500-2 200).

元の言語英語
ページ(範囲)2168-2177
ページ数10
ジャーナルNihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
76
発行部数772
DOI
出版物ステータス出版済み - 12 2010
外部発表Yes

    フィンガープリント

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanical Engineering

これを引用