TY - JOUR
T1 - The first experiment of MPD Jet injection into GAMMA 10 plasma
AU - Ichimura, Kazuya
AU - Nakashima, Yousuke
AU - Takeda, Hisato
AU - Hosoi, Katsuhiro
AU - Kigure, Satoru
AU - Takahashi, Shigehito
AU - Iwamoto, Miki
AU - Hosoda, Yasunari
AU - Hirata, Mafumi
AU - Ikezoe, Ryuya
AU - Oki, Kensuke
AU - Yoshikawa, Masayuki
AU - Sakamoto, Mizuki
AU - Imai, Tsuyoshi
AU - Ichimura, Makoto
N1 - Publisher Copyright:
© 2014 The Japan Society of Plasma Science and Nuclear Fusion Research.
Copyright:
Copyright 2015 Elsevier B.V., All rights reserved.
PY - 2014
Y1 - 2014
N2 - Results of the first experiment of short pulse plasma injection by MPD (magneto plasma dynamic) Jet into GAMMA 10/PDX's longer pulse plasma are reported. In the experiment, a new method for plasma start-up without using plasma guns was applied. In this method, the main plasma of GAMMA 10/PDX was produced by ECRH (electron cyclotron resonance heating) and ICRF (ion cyclotron range of frequency). Then, MPD Jet plasma was injected into the main plasma along magnetic field line. As a result, density of the main plasma was increased and the end-loss flux was doubled. Flow velocity of the plasmoid injected by the MPD Jet was evaluated from the change of plasma density in each cell of the tandem mirror. The result indicated that the flow speed is several km/s. It is found that the plasmoid worked as strong fueling device which dramatically raises the density of plasma. Therefore injection of MPD Jet plasma into tandem mirror can be a useful tool to study physical phenomena of divertor and PWI.
AB - Results of the first experiment of short pulse plasma injection by MPD (magneto plasma dynamic) Jet into GAMMA 10/PDX's longer pulse plasma are reported. In the experiment, a new method for plasma start-up without using plasma guns was applied. In this method, the main plasma of GAMMA 10/PDX was produced by ECRH (electron cyclotron resonance heating) and ICRF (ion cyclotron range of frequency). Then, MPD Jet plasma was injected into the main plasma along magnetic field line. As a result, density of the main plasma was increased and the end-loss flux was doubled. Flow velocity of the plasmoid injected by the MPD Jet was evaluated from the change of plasma density in each cell of the tandem mirror. The result indicated that the flow speed is several km/s. It is found that the plasmoid worked as strong fueling device which dramatically raises the density of plasma. Therefore injection of MPD Jet plasma into tandem mirror can be a useful tool to study physical phenomena of divertor and PWI.
UR - http://www.scopus.com/inward/record.url?scp=84945277089&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84945277089&partnerID=8YFLogxK
U2 - 10.1585/pfr.9.3406098
DO - 10.1585/pfr.9.3406098
M3 - Article
AN - SCOPUS:84945277089
VL - 9
JO - Plasma and Fusion Research
JF - Plasma and Fusion Research
SN - 1880-6821
IS - SpecialIssue2
M1 - 3406098
ER -