The gas sensor utilizing polyaniline/ MoS2 nanosheets/ SnO2 nanotubes for the room temperature detection of ammonia

Ao Liu, Siyuan Lv, Li Jiang, Fangmeng Liu, Lianjing Zhao, Jing Wang, Xiaolong Hu, Zijie Yang, Junming He, Chenguang Wang, Xu Yan, Peng Sun, Kengo Shimanoe, Geyu Lu

研究成果: Contribution to journalArticle査読

13 被引用数 (Scopus)


In this work, we developed a NH3 gas sensor based on polyaniline (PANI) composited with MoS2 nanosheet-coated SnO2 nanotubes (PMS) via electrostatic spinning, hydrothermal route and in-situ polymerization technique. The morphologies, nanostructures and compositions of the materials were obtained from X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Field emission scanning electron microscopy (FESEM), Transmission electron microscope (TEM) and Brunauer-Emmett-Teller method (BET). Thanks to nanostructure and the synergistic properties of PANI and MoS2/SnO2, the designed PMS gas sensor exhibited response signal of 10.9 towards 100 ppm NH3 at room temperature and a low detection limit of 200 ppb with good response-recovery time, good repeatability, acceptable flexibility and excellent selectivity. This study offers a versatile platform to modify PANI for highly selective detection of NH3 gas sensor at room temperature.

ジャーナルSensors and Actuators, B: Chemical
出版ステータス出版済み - 4 1 2021

All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 器械工学
  • 凝縮系物理学
  • 表面、皮膜および薄膜
  • 金属および合金
  • 電子工学および電気工学
  • 材料化学


「The gas sensor utilizing polyaniline/ MoS<sub>2</sub> nanosheets/ SnO<sub>2</sub> nanotubes for the room temperature detection of ammonia」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。