The Role of Hydrogen on the Local Fracture Toughness Properties of 7XXX Aluminum Alloys

Md Shahnewaz Bhuiyan, Hiroyuki Toda, Kazuyuki Shimizu, Hang Su, Kentaro Uesugi, Akihisa Takeuchi, Yoshio Watanabe

研究成果: ジャーナルへの寄稿学術誌査読

5 被引用数 (Scopus)

抄録

High-resolution synchrotron X-ray microtomography has been successfully used to evaluate the local crack driving force at arbitrary crack tip locations as a form of CTOD. This is to our knowledge the first experimental evidence in supporting a correlation between the local fracture toughness associated with the corresponding hydrogen-assisted fracture mode including quasi-cleavage, intergranular, and dimple. Our results have revealed that very small CTOD, of about 1.26 μm, is observed when the crack tip is located in the quasi-cleavage fracture. Compared to quasi-cleavage fracture, the CTOD values increase by a factor of 5 when the crack tip is located in intergranular fracture mode and even greater increase in CTOD (of about 18 times) is observed when the crack tip is located in dimple fracture mode. We also observed that the crack propagation process under the influence of hydrogen deviates greatly from that of standard behavior, where stable crack growth is accompanied by a change in crack tip singularity from the HRR to the RDS. It was concluded that the presence of high concentration of hydrogen ahead of the crack tip increases the slip localization, and thereby reduces crack tip blunting. Hence crack continues to grow before the crack tip becomes fully blunt.

本文言語英語
ページ(範囲)5368-5381
ページ数14
ジャーナルMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
49
11
DOI
出版ステータス出版済み - 11月 1 2018

!!!All Science Journal Classification (ASJC) codes

  • 凝縮系物理学
  • 材料力学
  • 金属および合金

フィンガープリント

「The Role of Hydrogen on the Local Fracture Toughness Properties of 7XXX Aluminum Alloys」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル