Thermal conductivity measurement of gases by the transient short-hot-wire method

S. Moroe, P. L. Woodfield, J. Fukai, K. Shinzato, M. Kohno, M. Fujii, Y. Takata

研究成果: Contribution to journalArticle査読

7 被引用数 (Scopus)

抄録

Measurements of the thermal conductivity of helium and hydrogen are performed using the transient short-hot-wire method. The short hot wire is made of platinum and has a diameter of about 10 μm and a length of about 15 mm. It is attached by spot welding to platinum terminals with a diameter of 1.5 mm. The probe is inserted into the sample vessel that has a volume of 35 cm 3 and an inner diameter of 30 mm. The thermal conductivity is evaluated by comparing a numerical solution of the heat conduction in and around the short wire with the experimentally obtained temperature rise of the wire. The measured thermal conductivities show good reproducibility. Also, the measured thermal conductivities agree with the reference equations within a deviation of ± 1%.

本文言語英語
ページ(範囲)168-178
ページ数11
ジャーナルExperimental Heat Transfer
24
2
DOI
出版ステータス出版済み - 4 1 2011

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Instrumentation
  • Electrical and Electronic Engineering

フィンガープリント 「Thermal conductivity measurement of gases by the transient short-hot-wire method」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル