Threshold Stress for High-Temperature Creep in Particle Strengthened Al-1.5 vol%Be Alloys

Ying Hwa Yeh, Shoji Goto, Hideo Yoshinaga, Hideharu Nakashima, Hiroaki Kurishita

研究成果: Contribution to journalArticle査読

42 被引用数 (Scopus)


High temperature creep of dispersion-strengthened Al-1.5 vol%Be alloy has been studied over a stress range 3.1 × 10-5~5.9 × l0-4E (E: the Young's modulus of Al matrix), which corresponds to 0.40~5.lσoror: the Orowan stress), at temperatures from 473 to 723 K. It is found that there occurs a threshold stress for creep deformation, σth, and the value of σth is approximately equal to that of σor and their ratio, σthor, is almost independent of the particle size and test temperature. At stresses below σth, plastic deformation of very slow rates takes place which may be associated with grain-boundary sliding and diffusional creep. In-situ HVEM observation reveals that the interaction between dislocation and particles is of attractive type and no dislocation line is visible at the particle/matrix interface, indicating that the stress field of a dislocation is almost completely relaxed at the interface. The observed threshold stress is discussed from the viewpoint of the attractive interaction.

ジャーナルMaterials Transactions, JIM
出版ステータス出版済み - 1990

All Science Journal Classification (ASJC) codes

  • Engineering(all)

フィンガープリント 「Threshold Stress for High-Temperature Creep in Particle Strengthened Al-1.5 vol%Be Alloys」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。