Transformation from ferrite to austenite during/after solidification in peritectic steel systems: An x-ray imaging study

Hideyuki YASUDA, Kohei MORISHITA, Masato YOSHIYA, Taka NARUMI

    研究成果: Contribution to journalReview article査読

    抄録

    X-ray transmission imaging with X-ray diffractometry and time-resolved tomography with three-dimensional X-ray diffraction microscopy have been used to observe solidification and transformation in carbon steel and other Fe-based alloys. The imaging techniques showed a massive-like transformation, in which multiple austenite grains were produced in a single δ grain through a solid-solid transformation. The critical velocity from the diffusion-controlled growth of the γ phase to the massive-like transformation was as low as 5 μm/s. X-ray imaging indicated that the δ phase transforms massively to the γ phase in the conventional solidification processes, such as continuous casting. The massive-like transformation and multiple γ grains that were produced in the transformation were related to the subsequent microstructure evolution and casting defect formation. Solidification model including the massive-like transformation is expected to improve our understanding the solidification and the related phenomena in the peritectic steel systems.

    本文言語英語
    ページ(範囲)2755-2764
    ページ数10
    ジャーナルisij international
    60
    12
    DOI
    出版ステータス出版済み - 12 15 2020

    All Science Journal Classification (ASJC) codes

    • 材料力学
    • 機械工学
    • 金属および合金
    • 材料化学

    フィンガープリント

    「Transformation from ferrite to austenite during/after solidification in peritectic steel systems: An x-ray imaging study」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル