Transmission electron microscopy of Au-Al wire bonded interface

Hiroshi Haji, Kousuke Miyoshi, Toshiaki Morita, Hideharu Nakashima, Hideo Yoshinaga

研究成果: Contribution to journalArticle査読

6 被引用数 (Scopus)

抄録

In order to develop a microstructure observing technique for bonded interfaces, which is important in the IC industry, thin films of wire-bonded Au-Al samples were prepared by ion milling and microtome techniques and observed by transmission electron microscopy. The effect of heating on the microstructure and residual stress was also investigated by electron and X-ray diffraction. The results obtained are as follows. (1) In the films prepared with a microtome no amorphous phase is observed, whereas in the films prepared by ion milling a large part of the intermetallic compound formed on the interface is in the amorphous state. (2) The A12Au5 phase grows predominantly among the five intermetallic compounds which can be formed on the interface. (3) Voids are produced by heating along the Au-Al2Au5 boundary. (4) A larger compressive residual stress is produced after heating on the Au side than on the Al side. From these results, a suitable technique for microstructure observation of the interface and the deterioration mechanism of the bonded interface are discussed.

本文言語英語
ページ(範囲)355-360
ページ数6
ジャーナルNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
56
4
DOI
出版ステータス出版済み - 1992

All Science Journal Classification (ASJC) codes

  • 凝縮系物理学
  • 材料力学
  • 金属および合金
  • 材料化学

フィンガープリント

「Transmission electron microscopy of Au-Al wire bonded interface」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル