Two-dimensional flow analysis in a Darrieus-type water turbine with arbitrary-shaped duct

Akinori Furukawa, Kazuki Takenouchi, Preethisri Ananda Gajanayake, Kusuo Okuma

研究成果: Contribution to journalArticle査読

抄録

One solution method for an inviscid flow field of a two-dimensional Darrieus-type runner in an arbitrary-shaped duct and a draft tube is proposed in the present paper. This computation consists of two stages. As the first stage, the flow through the duct is analyzed by a panel method with vortices distributed on the duct walls and the stream function and velocity potential are obtained at any position in the physical plane. Using these values the flow field is transformed to the reflected plane of flow with parallel walls as the stream function on the wall becomes constant. The induced flow due to bound and released vortices of the Darrieus blades is analyzed by the image method in the second stage. The evaluated Darrieus blade characteristics from the measured data with this solution and the calculated flow distortions due to the blade behavior are shown and discussed for ducts of various shapes.

本文言語英語
ページ(範囲)2144-2150
ページ数7
ジャーナルNippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
62
598
DOI
出版ステータス出版済み - 1996
外部発表はい

All Science Journal Classification (ASJC) codes

  • 凝縮系物理学
  • 機械工学

フィンガープリント

「Two-dimensional flow analysis in a Darrieus-type water turbine with arbitrary-shaped duct」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル