Ultra-thin silicon/electro-optic polymer hybrid waveguide modulators

Feng Qiu, Hiromu Sato, Andrew M. Spring, Daisuke Maeda, Masa Aki Ozawa, Keisuke Odoi, Isao Aoki, Akira Otomo, Shiyoshi Yokoyama

研究成果: ジャーナルへの寄稿学術誌査読

40 被引用数 (Scopus)

抄録

Ultra-thin silicon and electro-optic (EO) polymer hybrid waveguide modulators have been designed and fabricated. The waveguide consists of a silicon core with a thickness of 30 nm and a width of 2 μm. The cladding is an EO polymer. Optical mode calculation reveals that 55% of the optical field around the silicon extends into the EO polymer in the TE mode. A Mach-Zehnder interferometer (MZI) modulator was prepared using common coplanar electrodes. The measured half-wave voltage of the MZI with 7 μm spacing and 1.3 cm long electrodes is 4.6 V at 1550 nm. The evaluated EO coefficient is 70 pm/V, which is comparable to that of the bulk EO polymer film. Using ultra-thin silicon is beneficial in order to reduce the side-wall scattering loss, yielding a propagation loss of 4.0 dB/cm. We also investigated a mode converter which couples light from the hybrid EO waveguide into a strip silicon waveguide. The calculation indicates that the coupling loss between these two devices is small enough to exploit the potential fusion of a hybrid EO polymer modulator together with a silicon micro-photonics device.

本文言語英語
論文番号123302
ジャーナルApplied Physics Letters
107
12
DOI
出版ステータス出版済み - 9月 21 2015

!!!All Science Journal Classification (ASJC) codes

  • 物理学および天文学(その他)

フィンガープリント

「Ultra-thin silicon/electro-optic polymer hybrid waveguide modulators」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル