Ultrahigh strength ferrous sintered components

Osamu Furukimi, Koji Yano, Shigeaki Takajo

    研究成果: Contribution to journalArticle査読

    6 被引用数 (Scopus)

    抄録

    Compacts made from a newly developed composite-type alloy steel powder with 2%Ni and 1%Mo show superior mechanical properties after heat treatment. The case-hardened compacts exhibit a tensile strength of 1500MPa, absorbed energy of 21J, rotating bend fatigue strength of 460MPa and a compact fatigue strength of 2530MPa. The levels exceed the corresponding values for compacts made from a conventional 4%Ni-0.5%Mo-1.5%Cu steel powder, which are 1380 MPa, K 20J, 410MPa and 2430MPa, respectively. Double-pressed, double-sintered, bright-quenched and tempered compacts made from the new powder posses ultrahigh tensile strength of 1920MPa with high absorbed energy of 35J. The extraodrinary strengthening is attributed to the strain-induced transformation of Ni-rich austenite to martensite. In the sintered and heat-treated compacts made from the new powder, the austenite transforms almost completely to martensite under stress.

    本文言語英語
    ジャーナルInternational Journal of Powder Metallurgy (Princeton, New Jersey)
    27
    4
    出版ステータス出版済み - 10 1991

    All Science Journal Classification (ASJC) codes

    • 金属および合金
    • 産業および生産工学

    フィンガープリント

    「Ultrahigh strength ferrous sintered components」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル