Vaporization and nucleation on microheater in microchannel with nozzle

Koji Takahashi, Hirofumi Sakai, Kunihito Nagayama, Akihito Baba, Kenji Makihira, Tanemasa Asano

研究成果: 著書/レポートタイプへの貢献会議での発言

2 引用 (Scopus)

抄録

A vaporization microchamber is fabricated by the MEMS technology in order to improve and check the concept of vaporizing liquid microthruster for nanosatellite. This chamber is a part of microchannel with 2-10 micrometers height made by silicon and glass substrates. Nozzle is fabricated in silicon just above a thin film ITO heater deposited on glass. Liquid propellant is repetitively pulse-heated by the heater and the flow pattern is recorded thorough glass and ITO by high-speed video camera. Four types of flow patterns are found depending on the employed voltage, pulse width and frequency. For example, large heat flux per pulse of high frequency does not allow the liquid to fill the chamber. Even with lower heat flux, no droplet emission from the nozzle is observed because the nozzle itself is heated enough in this geometry. The nanoscale cavity or roughness on heating surface is found to play an important role for the nucleation in microchannel. The preferable thermal design for microthruster is also discussed.

元の言語英語
ホスト出版物のタイトル35th AIAA Thermophysics Conference
出版物ステータス出版済み - 2001
イベント35th AIAA Thermophysics Conference 2001 - Anaheim, CA, 米国
継続期間: 6 11 20016 14 2001

その他

その他35th AIAA Thermophysics Conference 2001
米国
Anaheim, CA
期間6/11/016/14/01

Fingerprint

microchannels
Microchannels
Vaporization
nozzles
Nozzles
Nucleation
nucleation
ITO (semiconductors)
heaters
Glass
Flow patterns
Heat flux
glass
heat flux
flow distribution
liquids
chambers
Nanosatellites
nanosatellites
Liquid propellants

All Science Journal Classification (ASJC) codes

  • Aerospace Engineering
  • Mechanical Engineering
  • Condensed Matter Physics

これを引用

Takahashi, K., Sakai, H., Nagayama, K., Baba, A., Makihira, K., & Asano, T. (2001). Vaporization and nucleation on microheater in microchannel with nozzle. : 35th AIAA Thermophysics Conference

Vaporization and nucleation on microheater in microchannel with nozzle. / Takahashi, Koji; Sakai, Hirofumi; Nagayama, Kunihito; Baba, Akihito; Makihira, Kenji; Asano, Tanemasa.

35th AIAA Thermophysics Conference. 2001.

研究成果: 著書/レポートタイプへの貢献会議での発言

Takahashi, K, Sakai, H, Nagayama, K, Baba, A, Makihira, K & Asano, T 2001, Vaporization and nucleation on microheater in microchannel with nozzle. : 35th AIAA Thermophysics Conference. 35th AIAA Thermophysics Conference 2001, Anaheim, CA, 米国, 6/11/01.
Takahashi K, Sakai H, Nagayama K, Baba A, Makihira K, Asano T. Vaporization and nucleation on microheater in microchannel with nozzle. : 35th AIAA Thermophysics Conference. 2001
Takahashi, Koji ; Sakai, Hirofumi ; Nagayama, Kunihito ; Baba, Akihito ; Makihira, Kenji ; Asano, Tanemasa. / Vaporization and nucleation on microheater in microchannel with nozzle. 35th AIAA Thermophysics Conference. 2001.
@inproceedings{8cf2a56addc34f5e9e85aa01d723f4aa,
title = "Vaporization and nucleation on microheater in microchannel with nozzle",
abstract = "A vaporization microchamber is fabricated by the MEMS technology in order to improve and check the concept of vaporizing liquid microthruster for nanosatellite. This chamber is a part of microchannel with 2-10 micrometers height made by silicon and glass substrates. Nozzle is fabricated in silicon just above a thin film ITO heater deposited on glass. Liquid propellant is repetitively pulse-heated by the heater and the flow pattern is recorded thorough glass and ITO by high-speed video camera. Four types of flow patterns are found depending on the employed voltage, pulse width and frequency. For example, large heat flux per pulse of high frequency does not allow the liquid to fill the chamber. Even with lower heat flux, no droplet emission from the nozzle is observed because the nozzle itself is heated enough in this geometry. The nanoscale cavity or roughness on heating surface is found to play an important role for the nucleation in microchannel. The preferable thermal design for microthruster is also discussed.",
author = "Koji Takahashi and Hirofumi Sakai and Kunihito Nagayama and Akihito Baba and Kenji Makihira and Tanemasa Asano",
year = "2001",
language = "English",
booktitle = "35th AIAA Thermophysics Conference",

}

TY - GEN

T1 - Vaporization and nucleation on microheater in microchannel with nozzle

AU - Takahashi, Koji

AU - Sakai, Hirofumi

AU - Nagayama, Kunihito

AU - Baba, Akihito

AU - Makihira, Kenji

AU - Asano, Tanemasa

PY - 2001

Y1 - 2001

N2 - A vaporization microchamber is fabricated by the MEMS technology in order to improve and check the concept of vaporizing liquid microthruster for nanosatellite. This chamber is a part of microchannel with 2-10 micrometers height made by silicon and glass substrates. Nozzle is fabricated in silicon just above a thin film ITO heater deposited on glass. Liquid propellant is repetitively pulse-heated by the heater and the flow pattern is recorded thorough glass and ITO by high-speed video camera. Four types of flow patterns are found depending on the employed voltage, pulse width and frequency. For example, large heat flux per pulse of high frequency does not allow the liquid to fill the chamber. Even with lower heat flux, no droplet emission from the nozzle is observed because the nozzle itself is heated enough in this geometry. The nanoscale cavity or roughness on heating surface is found to play an important role for the nucleation in microchannel. The preferable thermal design for microthruster is also discussed.

AB - A vaporization microchamber is fabricated by the MEMS technology in order to improve and check the concept of vaporizing liquid microthruster for nanosatellite. This chamber is a part of microchannel with 2-10 micrometers height made by silicon and glass substrates. Nozzle is fabricated in silicon just above a thin film ITO heater deposited on glass. Liquid propellant is repetitively pulse-heated by the heater and the flow pattern is recorded thorough glass and ITO by high-speed video camera. Four types of flow patterns are found depending on the employed voltage, pulse width and frequency. For example, large heat flux per pulse of high frequency does not allow the liquid to fill the chamber. Even with lower heat flux, no droplet emission from the nozzle is observed because the nozzle itself is heated enough in this geometry. The nanoscale cavity or roughness on heating surface is found to play an important role for the nucleation in microchannel. The preferable thermal design for microthruster is also discussed.

UR - http://www.scopus.com/inward/record.url?scp=84894523398&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84894523398&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84894523398

BT - 35th AIAA Thermophysics Conference

ER -