Variations of nanoparticle layer properties during nucleate pool boiling

Tomio Okawa, Koki Nakano, Yutaro Umehara

研究成果: ジャーナルへの寄稿会議記事査読

抄録

The nanoparticle layer detachment during nucleate pool boiling and its influences on heat transfer surface properties were explored experimentally. The material of the heat transfer surface was copper and the nanoparticle layer was formed on the heat transfer surface by nucleate boiling in the water-based TiO2 nanofluid. It was found that the detachment of the nanoparticle layer during nucleate boiling in pure water is significant. In the present experiment, more than half of nanoparticles deposited on the heated surface were detached before the CHF condition was reached. The thickness and roughness decreased accordingly. However, the wettability and wickability that are the influential parameters on the CHF value were maintained even after the occurrence of nanoparticle layer detachment and deteriorated only after the CHF condition was reached. It is therefore considered that the onset of CHF brings qualitative change to the capillary suction performance of the layer of nanoparticles. In exploring the effect of the nanoparticle layer properties on the nucleate boiling heat transfer, sufficient attention should be paid to the variation of the nanoparticle layer properties during nucleate boiling.

本文言語英語
論文番号012002
ジャーナルJournal of Physics: Conference Series
2116
1
DOI
出版ステータス出版済み - 12月 8 2021
外部発表はい
イベント8th European Thermal Sciences Conference, EUROTHERM 2021 - Virtual, Online
継続期間: 9月 20 20219月 22 2021

!!!All Science Journal Classification (ASJC) codes

  • 物理学および天文学(全般)

フィンガープリント

「Variations of nanoparticle layer properties during nucleate pool boiling」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル