Vibration reduction in pump piping system using flexible joints and a rigid disk (investigation of straight-line piping)

Yasuhiro Bonkobara, Takahiro Kondou, Shuji Shiraki, Yuichiro Sakamoto

研究成果: ジャーナルへの寄稿学術誌査読

抄録

A vibration reduction method that involves installing two flexible joints in series has been found to be useful for countermeasures against structure-borne sound in pump piping system. However, it has the practical difficulty that the pipe's vibration mode must be measured many times for determining the optimum location of flexible joints. Therefore, we newly propose the technique using two flexible joints and a rigid disk in order to improve the practicality of the previous method. In the present method, two flexible joints are first installed anywhere on the piping near the pump, and a rigid disk is then mounted on the piping between the pump and the flexible joint. Then, the pipe vibration can be easily reduced by just adjusting the location of the rigid disk without measuring the pipe's vibration mode. In this paper, the influence of underwater sound is neglected for simplify and the effectiveness of the present method in reducing vibration in straight-line piping is investigated analytically and experimentally. The results of the numerical analyses and experiments confirm that the present method is excellent in terms of usefulness and can achieve the vibration reduction effect comparable to the previous method.

本文言語英語
ページ(範囲)2232-2239
ページ数8
ジャーナルNihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
76
769
DOI
出版ステータス出版済み - 9月 2010

!!!All Science Journal Classification (ASJC) codes

  • 材料力学
  • 機械工学
  • 産業および生産工学

フィンガープリント

「Vibration reduction in pump piping system using flexible joints and a rigid disk (investigation of straight-line piping)」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル