Visualization of hydrogen diffusion in a hydrogen-enhanced fatigue crack growth in type 304 stainless steel

Hisao Matsunaga, Hiroshi Noda

研究成果: Contribution to journalArticle査読

32 被引用数 (Scopus)

抄録

To study the influence of hydrogen on the fatigue strength of AISI type 304 metastable austenitic stainless steel, specimens were cathodically charged with hydrogen. Using tensioncompression fatigue tests, the behavior of fatigue crack growth from a small drill hole in the hydrogen-charged specimen was compared with that of noncharged specimen. Hydrogen charging led to a marked increase in the crack growth rate. Typical characteristics of hydrogen effect were observed in the slip band morphology and fatigue striation. To elucidate the behavior of hydrogen diffusion microscopically in the fatigue process, the hydrogen emission from the specimens was visualized using the hydrogen microprint technique (HMT). In the hydrogen-charged specimen, hydrogen emissions were mainly observed in the vicinity of the fatigue crack. Comparison between the HMT image and the etched microstructure image revealed that the slip bands worked as a pathway for hydrogen to move preferentially. Hydrogencharging resulted in a significant change in the phase transformation behavior in the fatigue process. In the noncharged specimen, a massive type α' martensite was observed in the vicinity of the fatigue crack. On the other hand, in the hydrogen-charged specimen, large amounts of e martensite and a smaller amount of α' martensite were observed along the slip bands. The results indicated that solute hydrogen facilitated the e martensitic transformation in the fatigue process. Comparison between the results of HMT and EBSD inferred that martensitic transformations as well as plastic deformation itself can enhance the mobility of hydrogen.

本文言語英語
ページ(範囲)2696-2705
ページ数10
ジャーナルMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
42
9
DOI
出版ステータス出版済み - 9 2011
外部発表はい

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys

フィンガープリント 「Visualization of hydrogen diffusion in a hydrogen-enhanced fatigue crack growth in type 304 stainless steel」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル