Visualization of plastic strain distribution in a dual-phase steel using high-precision grid-markers

Hidekazu Minami, Hiroshi Ikeda, Tatsuya Morikawa, Kenji Higashida, Tsuyoshi Mayama, Yuki Toji, Kohei Hasegawa

研究成果: ジャーナルへの寄稿記事

5 引用 (Scopus)

抄録

The aspect of inhomogeneous deformation in a dual-phase steel has been quantitatively visualized by a new method using high-precision grid-marker which was lithographed on the specimen surface by electron beam. This method enables imaging of plastic strain distribution in wide areas of millimeter scale with nano-scale spatial resolution, which makes it possible to obtain general view of the detailed plastic strain distribution in deformed multi-constituent steels with fine complex microstructures. A small plate specimen with a microstructure containing 50%ferrite and 50%martensite was deformed in tension at room temperature, and the grid-marker of the same area was observed at the average equivalent strains of 7.2% and 13.7%. Strain mapping indicated the abundant formation of characteristic bands with strains much higher than the average values. The bands were inclined by 45 degrees to the tensile axis, and they developed with increasing strain particularly in the ferrite areas adjacent to the interface between ferrite and martensite. It was also found that martensite areas actually deformed plastically and their deformation contributed to one fifth of the total plastic strain of the specimen.

元の言語英語
ページ(範囲)303-310
ページ数8
ジャーナルTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
98
発行部数6
DOI
出版物ステータス出版済み - 2012

Fingerprint

strain distribution
Steel
markers
Plastic deformation
plastics
Visualization
martensite
grids
Martensite
steels
Ferrite
ferrites
microstructure
Microstructure
Electron beams
spatial resolution
electron beams
Imaging techniques
room temperature
Temperature

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

これを引用

Visualization of plastic strain distribution in a dual-phase steel using high-precision grid-markers. / Minami, Hidekazu; Ikeda, Hiroshi; Morikawa, Tatsuya; Higashida, Kenji; Mayama, Tsuyoshi; Toji, Yuki; Hasegawa, Kohei.

:: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 巻 98, 番号 6, 2012, p. 303-310.

研究成果: ジャーナルへの寄稿記事

Minami, Hidekazu ; Ikeda, Hiroshi ; Morikawa, Tatsuya ; Higashida, Kenji ; Mayama, Tsuyoshi ; Toji, Yuki ; Hasegawa, Kohei. / Visualization of plastic strain distribution in a dual-phase steel using high-precision grid-markers. :: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 2012 ; 巻 98, 番号 6. pp. 303-310.
@article{021eb9d070174c8286b531f410bd3062,
title = "Visualization of plastic strain distribution in a dual-phase steel using high-precision grid-markers",
abstract = "The aspect of inhomogeneous deformation in a dual-phase steel has been quantitatively visualized by a new method using high-precision grid-marker which was lithographed on the specimen surface by electron beam. This method enables imaging of plastic strain distribution in wide areas of millimeter scale with nano-scale spatial resolution, which makes it possible to obtain general view of the detailed plastic strain distribution in deformed multi-constituent steels with fine complex microstructures. A small plate specimen with a microstructure containing 50{\%}ferrite and 50{\%}martensite was deformed in tension at room temperature, and the grid-marker of the same area was observed at the average equivalent strains of 7.2{\%} and 13.7{\%}. Strain mapping indicated the abundant formation of characteristic bands with strains much higher than the average values. The bands were inclined by 45 degrees to the tensile axis, and they developed with increasing strain particularly in the ferrite areas adjacent to the interface between ferrite and martensite. It was also found that martensite areas actually deformed plastically and their deformation contributed to one fifth of the total plastic strain of the specimen.",
author = "Hidekazu Minami and Hiroshi Ikeda and Tatsuya Morikawa and Kenji Higashida and Tsuyoshi Mayama and Yuki Toji and Kohei Hasegawa",
year = "2012",
doi = "10.2355/tetsutohagane.98.303",
language = "English",
volume = "98",
pages = "303--310",
journal = "Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan",
issn = "0021-1575",
publisher = "一般社団法人 日本鉄鋼協会",
number = "6",

}

TY - JOUR

T1 - Visualization of plastic strain distribution in a dual-phase steel using high-precision grid-markers

AU - Minami, Hidekazu

AU - Ikeda, Hiroshi

AU - Morikawa, Tatsuya

AU - Higashida, Kenji

AU - Mayama, Tsuyoshi

AU - Toji, Yuki

AU - Hasegawa, Kohei

PY - 2012

Y1 - 2012

N2 - The aspect of inhomogeneous deformation in a dual-phase steel has been quantitatively visualized by a new method using high-precision grid-marker which was lithographed on the specimen surface by electron beam. This method enables imaging of plastic strain distribution in wide areas of millimeter scale with nano-scale spatial resolution, which makes it possible to obtain general view of the detailed plastic strain distribution in deformed multi-constituent steels with fine complex microstructures. A small plate specimen with a microstructure containing 50%ferrite and 50%martensite was deformed in tension at room temperature, and the grid-marker of the same area was observed at the average equivalent strains of 7.2% and 13.7%. Strain mapping indicated the abundant formation of characteristic bands with strains much higher than the average values. The bands were inclined by 45 degrees to the tensile axis, and they developed with increasing strain particularly in the ferrite areas adjacent to the interface between ferrite and martensite. It was also found that martensite areas actually deformed plastically and their deformation contributed to one fifth of the total plastic strain of the specimen.

AB - The aspect of inhomogeneous deformation in a dual-phase steel has been quantitatively visualized by a new method using high-precision grid-marker which was lithographed on the specimen surface by electron beam. This method enables imaging of plastic strain distribution in wide areas of millimeter scale with nano-scale spatial resolution, which makes it possible to obtain general view of the detailed plastic strain distribution in deformed multi-constituent steels with fine complex microstructures. A small plate specimen with a microstructure containing 50%ferrite and 50%martensite was deformed in tension at room temperature, and the grid-marker of the same area was observed at the average equivalent strains of 7.2% and 13.7%. Strain mapping indicated the abundant formation of characteristic bands with strains much higher than the average values. The bands were inclined by 45 degrees to the tensile axis, and they developed with increasing strain particularly in the ferrite areas adjacent to the interface between ferrite and martensite. It was also found that martensite areas actually deformed plastically and their deformation contributed to one fifth of the total plastic strain of the specimen.

UR - http://www.scopus.com/inward/record.url?scp=84862233503&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84862233503&partnerID=8YFLogxK

U2 - 10.2355/tetsutohagane.98.303

DO - 10.2355/tetsutohagane.98.303

M3 - Article

AN - SCOPUS:84862233503

VL - 98

SP - 303

EP - 310

JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

SN - 0021-1575

IS - 6

ER -