W-concentration 3D mapping in SKH51 steel by dual-energy kabsorption edge subtraction imaging

Masakazu Kobayashi, Hiroyuki Toda, Akihide Takijiri, Akihisa Takeuchi, Yoshio Suzuki, Kentaro Uesugi

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

抄録

Three-dimensional W-concentration mapping is attempted in a high speed tool steel, SKH51 by applying K-absorption edge subtraction imaging utilizing high energy X-ray in synchrotron radiation facility. Effect of a sample-to-detector distance on spatial resolution had already been reported in high-energy X-ray microtomography. Therefore, effect of the sample-to-detector distance on W-concentration obtained by the Kabsorption edge subtraction imaging has been assessed in this study. A fine CT image was obtained in 65 mm sample-to-detector distance with the influence of both scattering and diffraction on spatial resolution. Although image quality depended on sample-to-detector distance, the distance did not affect Wconcentration measured by the absorption edge subtraction imaging so much, because the effect is limited on object interface. The average W-concentration in whole specimen was consistent with the chemical composition in the SKH51 steel. The maximum W-concentration also agreed with the SEM-EDS result. It was not easy to assess W-concentration on a carbide particle by means of segmentation based on a linear absorption coefficient. The average W-concentration at an aggregated particle, which looks a large coarse particle in CT image, corresponded to the average W-concentration that was estimated based on SEM-EDS. Therefore, it was concluded that W-concentration obtained by K-absorption edge subtraction imaging was accurate. Three-dimensional W-concentration mapping was available in steels by dual-energy K-absorption edge subtraction imaging utilizing high energy X-ray.

元の言語英語
ページ(範囲)141-147
ページ数7
ジャーナルisij international
54
発行部数1
DOI
出版物ステータス出版済み - 2 26 2014

Fingerprint

Steel
Imaging techniques
Detectors
X rays
Energy dispersive spectroscopy
Scanning electron microscopy
Tool steel
Synchrotron radiation
Image quality
Carbides
Diffraction
Scattering
Chemical analysis

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

これを引用

W-concentration 3D mapping in SKH51 steel by dual-energy kabsorption edge subtraction imaging. / Kobayashi, Masakazu; Toda, Hiroyuki; Takijiri, Akihide; Takeuchi, Akihisa; Suzuki, Yoshio; Uesugi, Kentaro.

:: isij international, 巻 54, 番号 1, 26.02.2014, p. 141-147.

研究成果: ジャーナルへの寄稿記事

Kobayashi, Masakazu ; Toda, Hiroyuki ; Takijiri, Akihide ; Takeuchi, Akihisa ; Suzuki, Yoshio ; Uesugi, Kentaro. / W-concentration 3D mapping in SKH51 steel by dual-energy kabsorption edge subtraction imaging. :: isij international. 2014 ; 巻 54, 番号 1. pp. 141-147.
@article{e3e300bba1cb4a05aee140939cb2748b,
title = "W-concentration 3D mapping in SKH51 steel by dual-energy kabsorption edge subtraction imaging",
abstract = "Three-dimensional W-concentration mapping is attempted in a high speed tool steel, SKH51 by applying K-absorption edge subtraction imaging utilizing high energy X-ray in synchrotron radiation facility. Effect of a sample-to-detector distance on spatial resolution had already been reported in high-energy X-ray microtomography. Therefore, effect of the sample-to-detector distance on W-concentration obtained by the Kabsorption edge subtraction imaging has been assessed in this study. A fine CT image was obtained in 65 mm sample-to-detector distance with the influence of both scattering and diffraction on spatial resolution. Although image quality depended on sample-to-detector distance, the distance did not affect Wconcentration measured by the absorption edge subtraction imaging so much, because the effect is limited on object interface. The average W-concentration in whole specimen was consistent with the chemical composition in the SKH51 steel. The maximum W-concentration also agreed with the SEM-EDS result. It was not easy to assess W-concentration on a carbide particle by means of segmentation based on a linear absorption coefficient. The average W-concentration at an aggregated particle, which looks a large coarse particle in CT image, corresponded to the average W-concentration that was estimated based on SEM-EDS. Therefore, it was concluded that W-concentration obtained by K-absorption edge subtraction imaging was accurate. Three-dimensional W-concentration mapping was available in steels by dual-energy K-absorption edge subtraction imaging utilizing high energy X-ray.",
author = "Masakazu Kobayashi and Hiroyuki Toda and Akihide Takijiri and Akihisa Takeuchi and Yoshio Suzuki and Kentaro Uesugi",
year = "2014",
month = "2",
day = "26",
doi = "10.2355/isijinternational.54.141",
language = "English",
volume = "54",
pages = "141--147",
journal = "ISIJ International",
issn = "0915-1559",
publisher = "Iron and Steel Institute of Japan",
number = "1",

}

TY - JOUR

T1 - W-concentration 3D mapping in SKH51 steel by dual-energy kabsorption edge subtraction imaging

AU - Kobayashi, Masakazu

AU - Toda, Hiroyuki

AU - Takijiri, Akihide

AU - Takeuchi, Akihisa

AU - Suzuki, Yoshio

AU - Uesugi, Kentaro

PY - 2014/2/26

Y1 - 2014/2/26

N2 - Three-dimensional W-concentration mapping is attempted in a high speed tool steel, SKH51 by applying K-absorption edge subtraction imaging utilizing high energy X-ray in synchrotron radiation facility. Effect of a sample-to-detector distance on spatial resolution had already been reported in high-energy X-ray microtomography. Therefore, effect of the sample-to-detector distance on W-concentration obtained by the Kabsorption edge subtraction imaging has been assessed in this study. A fine CT image was obtained in 65 mm sample-to-detector distance with the influence of both scattering and diffraction on spatial resolution. Although image quality depended on sample-to-detector distance, the distance did not affect Wconcentration measured by the absorption edge subtraction imaging so much, because the effect is limited on object interface. The average W-concentration in whole specimen was consistent with the chemical composition in the SKH51 steel. The maximum W-concentration also agreed with the SEM-EDS result. It was not easy to assess W-concentration on a carbide particle by means of segmentation based on a linear absorption coefficient. The average W-concentration at an aggregated particle, which looks a large coarse particle in CT image, corresponded to the average W-concentration that was estimated based on SEM-EDS. Therefore, it was concluded that W-concentration obtained by K-absorption edge subtraction imaging was accurate. Three-dimensional W-concentration mapping was available in steels by dual-energy K-absorption edge subtraction imaging utilizing high energy X-ray.

AB - Three-dimensional W-concentration mapping is attempted in a high speed tool steel, SKH51 by applying K-absorption edge subtraction imaging utilizing high energy X-ray in synchrotron radiation facility. Effect of a sample-to-detector distance on spatial resolution had already been reported in high-energy X-ray microtomography. Therefore, effect of the sample-to-detector distance on W-concentration obtained by the Kabsorption edge subtraction imaging has been assessed in this study. A fine CT image was obtained in 65 mm sample-to-detector distance with the influence of both scattering and diffraction on spatial resolution. Although image quality depended on sample-to-detector distance, the distance did not affect Wconcentration measured by the absorption edge subtraction imaging so much, because the effect is limited on object interface. The average W-concentration in whole specimen was consistent with the chemical composition in the SKH51 steel. The maximum W-concentration also agreed with the SEM-EDS result. It was not easy to assess W-concentration on a carbide particle by means of segmentation based on a linear absorption coefficient. The average W-concentration at an aggregated particle, which looks a large coarse particle in CT image, corresponded to the average W-concentration that was estimated based on SEM-EDS. Therefore, it was concluded that W-concentration obtained by K-absorption edge subtraction imaging was accurate. Three-dimensional W-concentration mapping was available in steels by dual-energy K-absorption edge subtraction imaging utilizing high energy X-ray.

UR - http://www.scopus.com/inward/record.url?scp=84894242796&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84894242796&partnerID=8YFLogxK

U2 - 10.2355/isijinternational.54.141

DO - 10.2355/isijinternational.54.141

M3 - Article

AN - SCOPUS:84894242796

VL - 54

SP - 141

EP - 147

JO - ISIJ International

JF - ISIJ International

SN - 0915-1559

IS - 1

ER -