Wind turbine tower optimization method using genetic algorithm

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

抄録

A wind turbine tower optimization program was developed, using a genetic algorithm. This allowed a rational analysis to reduce the mass of turbine tower, by considering, for example, the distributions of diameter and wall thickness, and the positions of flanges and access ports to navigation lights. Both extreme and fatigue loads were calculated, based on wind turbine design requirements and the Building Standard Law of Japan. Therefore, the aero-elastic characteristics and the controller of each turbine were considered. Furthermore, sensitivities to some representative design parameters were also investigated in case studies of the SUBARU80/2.0, 2MW turbine.

本文言語英語
ホスト出版物のタイトルEuropean Wind Energy Conference and Exhibition 2007, EWEC 2007
ページ1651-1655
ページ数5
出版ステータス出版済み - 12 1 2007
外部発表はい
イベントEuropean Wind Energy Conference and Exhibition 2007, EWEC 2007 - Milan, イタリア
継続期間: 5 7 20075 10 2007

出版物シリーズ

名前European Wind Energy Conference and Exhibition 2007, EWEC 2007
3

その他

その他European Wind Energy Conference and Exhibition 2007, EWEC 2007
国/地域イタリア
CityMilan
Period5/7/075/10/07

All Science Journal Classification (ASJC) codes

  • 再生可能エネルギー、持続可能性、環境

フィンガープリント

「Wind turbine tower optimization method using genetic algorithm」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル