Zero-current-switch Quasi-resonant boost converter in power factor correction applications

E. Firmansyah, S. Tomioka, S. Abe, Masahito Shoyama, T. Ninomiya

研究成果: 著書/レポートタイプへの貢献会議での発言

14 引用 (Scopus)

抜粋

A modified zero-current-switched quasi-resonant (ZCS-QR) boost converter is employed in a power factor correction (PFC) application. The main goal is to achieve a small-size low-noise PFC circuit based on single-switch boost topology. A clamp diode has been added to avoid the voltage ringing problem that is originally generated across the ZCS-QR switch during its turn-off period. The converter operation states after clamp diode application are presented. The PFC circuit control scheme implementation is also described. An experimental circuit with 100 V rms ac of 50 Hz input and 330 V dc output has been built. A high efficiency of 90% and the proof of compliance to the IEC61000-3-2 class D have been confirmed by experiment.

元の言語英語
ホスト出版物のタイトル24th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2009
ページ1165-1169
ページ数5
DOI
出版物ステータス出版済み - 6 1 2009
イベント24th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2009 - Washington, DC, 米国
継続期間: 2 15 20092 19 2009

出版物シリーズ

名前Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC

その他

その他24th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2009
米国
Washington, DC
期間2/15/092/19/09

    フィンガープリント

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

これを引用

Firmansyah, E., Tomioka, S., Abe, S., Shoyama, M., & Ninomiya, T. (2009). Zero-current-switch Quasi-resonant boost converter in power factor correction applications. : 24th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2009 (pp. 1165-1169). [4802810] (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC). https://doi.org/10.1109/APEC.2009.4802810