Zinc phosphate coating on 316L-type stainless steel using hydrothermal treatment

A. Valanezhad, Kanji Tsuru, M. Maruta, G. Kawachi, S. Matsuya, Kunio Ishikawa

研究成果: Contribution to journalArticle

19 引用 (Scopus)

抜粋

Parkerizing or zinc phosphatizing, a kind of zinc phosphate coating is utilized for mild steel to acquire a protective layer against a corrosion reaction. Although this method is useful for mild steels, it is not possible for 316L-type stainless steels (316L SS) because of their lower chemical reactivity. In order to investigate the possibility of preparing zinc phosphate coating on 316L SS, substrates were subjected to hydrothermal treatment in zinc phosphate solution at different temperatures and duration times. SEM observation with EDX analysis showed that the zinc phosphate coating layer was successfully prepared at 200°C for 24h. Besides, XRD results indicated that the crystal phase of the coating layer was assigned to zinclipscombite (ZnFe3+2(PO4)2(OH)2). Adhesive test indicated that the coating layer was strongly attached on the 316L SS substrate (more than 12.0±1.4MPa).

元の言語英語
ページ(範囲)2538-2541
ページ数4
ジャーナルSurface and Coatings Technology
205
発行部数7
DOI
出版物ステータス出版済み - 12 25 2010

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

フィンガープリント Zinc phosphate coating on 316L-type stainless steel using hydrothermal treatment' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用